events board of directors meeting notes application
bylaws
rules & regulations
slips & waiting list
treasurer's report
photos
links

Welcome to the
Little Peconic Yacht Club, Inc

Serving the boating needs of its
members since 1947

All members in good standing of the Colony Club of Southampton Shores are welcome to join the Little Peconic Yacht Club as an active or inactive member. Joining is easy. Just click on the “application” link above for instructions.

Your board of directors tries to keep this site up-dated with useful information. Click on the many links and see what your club is all about. It’s the best source for everything related to the Little Peconic Yacht Club.

Members should expect to receive their dues notices in March of every year. (Please inform the treasurer of any address changes.) The new season always starts with our memorial service at the dock on Memorial Day weekend, followed by a reception at the Southampton Shores Baseball field for all colony club members and their friends. The Little Peconic Yacht Club holds its annual meeting in August; please, watch for notices and plan to attend.

HAPPY BOATING!

LPYC Email Contact: LittlePeconicYC@gmail.com

 

 

How to...

Constructing a
Permanent Mooring

A permanent mooring must remain secure for long periods while unattended, occasionally under adverse conditions. for peace of mind, it should be properly sized for the job. Below are the basic components.

Anchor: The most common type of mooring anchor is the mushroom, which, under ideal conditions, can dig in, create suction and develop good holding power. A weight of 5-10 times boat length is a good rule of thumb. The heavier the better, as long as you don't have to move it. Heavy objects like concrete blocks and engine blocks can't dig in, so their holding power is not as great.

Chain: Chapman's recommends two sections of galvanized chain: A heavier, primary chain and a lighter, secondary chain. The primary (ground) chain lies on the bottom. Its length should be 1 1/2 times maximum water depth. The secondary (riding) chain, is connected to the ground chain with a galvanized shackle or swivel. It's usually half the size of the ground chain and equal in length to maximum water depth. The heavier chain is not used for the entire run so that the mooring buoy does not have to support an excessive amount of weight. Chain should be as large as possible. Make the riding chain at least double the size of the chain on your anchor rode.

Buoy: The buoy must have about twice as much flotation as the suspended chain has weight in order for it to ride high enough in the water to be visible. The Taylor T3C buoys allow you to pass the chain through the center of the buoy, and attach the pendant on top.

Pendant: The pendant attaches the chain to the boat. Large-diameter 3-strand nylon line is used because its inherent elasticity allows it to act as a shock absorber. Polyester line or stainless steel wire is preferred by some for better chafe resistance. Length should be about 2 1/2 times freeboard. Diameter should be as large as is practical as it must be able to fit through bow chocks and around a bow cleat. Chafe protection is recommended for the point where the pendant passes through a chock. A light pick-up buoy at the boat end makes it easy to grab the pendant.

 


Home  Events  Board of Directors  Meeting Notes  Application   Bylaws
Rules & Regulations  Slips & Waiting List  Treasurer's Report  Photos   Links

©2019 Little Peconic Yacht Club

site design by PLPCWebMods